Our most popular line is the 3/4" ported housing that takes the 10" process elements.  We can supply 20" housings, and also the "Big Blue" housings for those of you who need higher flow rates.  We recommend the use of polypropylene melt blown element, which we normally stock in 1,5,25 and 50 micron.  We can also supply a nylon net element that is cleanable, at 50 and 300 micron. 

See photo below for this housing, showing pressure gauge (to indicate when element is blocked) and hose tail adaptors.  Complete price £24.00, as shown.  Spare elements are £1.90 each, or boxes of 10 at £1.80 each.

                                                                        .

We are now in a position to offer the BIG BLUE style housings, as middle rear of photo.  These are 1 1/2" BSP ported and available in either 10" or 20" lengths.  They obviously offer greater flow rates for the larger producer.  Price is £75.00 for the popular 20" version, elements are £13 each (sold in boxes of 6)

In use, we recommend a pressure gauge between the pump and the housing.. take a note of the pressure with a new, clean element and change the element when that pressure increases by 30 psi.  The housing will take 110 psi.

If required, we can supply bowl spanners and brackets AT £6.00 EACH.

We can now also supply a 3/4" BSP male threaded stepped hose tail adaptor so you can connect a 13mm, 20mm or 25mm hose to the housing.  These cost £3.00 each.  Also, pressure gauges, 0-60psi, bottom mount, £3.00.